Photo 2 to 4: I used 24130, radius 1 tracks, to trace the curve on the plywood. The dimensions of the rectangle are 48 X 36 in, or 122 X 90 cm.
Photo 5: Framed module. Framing was done with 1/2 in (12 mm) birch plywood, width of the wood strips is 3 in (75 mm). It provides excellent structural support to the module. I already had in stock lengths of plywood, leftover from a previous project, so I was able to save lot of time. The layout legs are going to be fixed in the 3 narrow rectangles located at the ends, and corner, of the L.
Photo 6: Test-fit of the legs. Adjustable screw-on glides were installed at that point.
No comments:
Post a Comment